Missed Home Waterproof Construction Encyclopedia, No Regret

Introduction: How to do waterproofing construction for home decoration? Many netizens attach great importance to this aspect, fearing that poor home waterproofing construction may lead to many problems. Doing a good job in every step of home waterproofing construction, focusing on each construction link, is a very important part of waterproofing treatment. Because home waterproofing construction is an important step in ensuring the moisture-proof properties of home structures, the process of home waterproofing construction must be done in place. Next, the editor will talk to netizens about the process of waterproofing construction in home decoration. Let's take a look together.For more information referenceJinfu Home Unit Plan

A small encyclopedia on home waterproofing construction, if you miss it, you'll lose!

1、24The closed water test conducted before the waterproofing construction of home decoration is to better complete the next step of construction. Conducting a closed water test is an important means of testing the quality of indoor waterproofing. Seal the entrance and drain, and fill the room with water to a certain level,24If there is no significant decrease in the liquid level within an hour, it is considered qualified. After the closed water test is completed, the next construction can proceed. 2Smooth the wall surface with cement mortar

After completing the closed water test, the base layer should be treated first. Remove the original decorative materials, clean the floating soil and cement, and ensure that the surface is flat and dry. This approach is important in order to prevent leakage caused by inconsistent thickness when applying waterproof layers in the future. 3The ground and walls must be leveled with cement mortar first

, and then apply waterproofing treatment. Before waterproofing, be sure to clean the ground thoroughly and apply polyurethane waterproof coating repeatedly2to3No, this is the most recommended practice for home waterproofing construction engineers! The same thing to note is that the thickness of the coating should be consistent, so as to avoid leakage caused by uneven thickness of the waterproof coating.

A small encyclopedia on home waterproofing construction, if you miss it, you'll lose!

4Cleaning the joints between the wall and the ground, as well as the joints between the pipes and the ground, at the junction is the most prone to problems. It is necessary to urge workers to handle these edges and corners well, and waterproof coatings must be applied in place. Require the decoration team to provide cement root protection for the up and down pipes of the kitchen and bathroom, and brush them upwards from the ground10to20A centimeter polyurethane waterproof coating is applied, and then the ground is redone with polyurethane waterproofing, adding the original waterproof layer to form a composite waterproof layer to enhance waterproofing. 5Waterproofing treatment

Apply one coat on the base layer for waterproofing construction in home decoration, and wait for2—4After drying for hours, repeat the application again to complete the waterproof treatment. Waterproof coating should be applied evenly without any omissions, bulges, or peeling, otherwise it will affect the waterproof effect. A layer of fiberglass cloth can be added to the corners and root of the pipeline to enhance the effect. If polyurethane is chosen as the waterproof coating, apply it repeatedly2-3Just repeat it. Polyurethane coatings themselves can form elastic protective films and have certain tensile resistance. The editor suggests that in order to improve the waterproof effect, a layer of glass fiber cloth can be laid, but the cost will increase.

The importance of waterproofing construction in the entire home decoration process is self-evident, everyone must pay more attention! The above are the four home waterproofing construction methods that the editor has briefly introduced to netizens. Today's content is just like this, hoping to help everyone!