Talking about the installation steps and precautions of cabinets

Cabinets not only need to be selected well, but also installed properly to ensure normal use in the future. Follow me belowFuqiang Xili Apartment PlanDesignerLet's take a look at the installation steps and precautions for cabinets together.

     When it comes to installation, we may think that the installation of a complete cabinet is like children playing with building blocks, that is, putting together the various parts of the entire cabinet. In fact, things are not that simple. The process of installing an overall cabinet requires attention to many issues, and there are many factors to consider.

     Cabinet installation is a major event in home decoration, and there are many details that need to be paid attention to, such as the location of water and electricity arrangements, the installation of switches and sockets, the installation of gas pipelines, and so on.

Installation steps and precautions for cabinets

     1Water and electricity layout

     （1）The height of sockets and other points should be as uniform as possible, without too many height dimensions.

     （2）The distance from the wall should be rounded to an integer as much as possible to facilitate pre embedded measurement.

     （3）Dimensioning should start from fixed walls as much as possible, and should not start from surfaces such as pipeline wells where actual dimensions may change.

     （4）Annotations that are difficult to clearly identify should be supplemented with text. When encountering special brands and specifications of electrical appliances, specific research should be conducted before arranging water and electricity.

Installation steps and precautions for cabinets

     2Layout of water supply and drainage

     （1）Water supply angle valve: located in the center of the sink cabinet, with a distance between the hot and cold water angle valves150, height600。

     （2）Sewer pipe: The ground drainage is located in the middle of the hot and cold water angle valve, and the wall drainage requires that the height of the outlet pipe does not exceed300And try to embed it in the wall as much as possible.

     （3）The water supply, drainage, and sockets for dishwashers or washing machines are reserved in the sink cabinet, located near the side panel of the cabinet on the equipment side150The height is the same as that of the water tank. The pipeline passing through the equipment placement location must be pre embedded.

     （4）A refrigerator with ice making function needs to be equipped with a water outlet and height near the refrigerator600。

     （5）The sewage from Nakajima is placed inside the Nakajima sink cabinet, away from the back panel of the sink cabinet200。

Installation steps and precautions for cabinets

     3Sockets (all heights are at the bottom elevation of the socket outlet)

     （1）Height of spare socket on countertop1100。

     （2）Oven socket height700Set in the middle position behind the oven; The oven socket needs to be labeled as16A，4Square line.

     （3）Power at2000wThe above appliances and corresponding sockets must be labeled as16A，4Square line.

     （4）Spare sockets need to be reserved inside the sink cabinet, with a height of600. If a crusher without an air switch is configured, a control switch should be reserved on the wall.

     （5）Height of disinfection cabinet socket600Set in the middle position behind the disinfection cabinet.

     （6）Imported gas stoves and some domestic gas stoves require socket outlets, and the height is set according to the equipment below the gas stove. If it is a drawer cabinet or oven, the height is700The height of the door panel cabinet or disinfection cabinet is600. If it is a domino stove, each stove should be equipped with a socket.

     （7）The height of the microwave socket in the hanging cabinet is upward from the top plate of the microwave oven100Generally, the height of the lower opening of the hanging cabinet is high1380The height of the socket is basically1900。

     （8）Height of smoke hood socket2200If there are special circumstances, it can also be placed inside the ceiling.

     （9）The external refrigerator socket is located behind the refrigerator, with a height of600;The embedded refrigerator socket is set on top of the refrigerator cabinet, and the height is reserved according to the center of the door panel space on the refrigerator cabinet. If there is no space above, it is set in the compartment of the refrigerator cabinet, and the height is arranged according to the layout of the adjacent cabinet.

     （10）The equipment socket of the bottom cabinet should be placed in the center position on the bottom cabinet floor, and then connected to the cabinet after installation. The socket of the range hood should be placed inside the ceiling, and a fixed bracket should be marked on the ceiling for the installation of the range hood.

     （11）What is the difference between the depth of embedded electrical appliances and the depth of cabinets100Above, the socket is set behind the electrical equipment, less than100The sockets should be placed inside adjacent cabinets, not behind drawer cabinets.

Installation steps and precautions for cabinets

     4Gas pipelines, flue pipes, light lines, etc

     （1）Gas valve: If there is an open door cabinet or drawer cabinet under the gas stove, it should be placed at the height inside the cabinet650If there is equipment under the gas stove, it should be placed as close as possible to the intake valve of the gas stove in the adjacent cabinet, and the position and height should be arranged according to the situation of the adjacent cabinet. If it is a seasoning basket, the height should be arranged650At the same time, the distance from the equipment cabinet150If the width is less than200The cabinet should be skipped and placed in the adjacent cabinet. The gas branch pipe should be placed against the wall or against the ground.

     （2）A gas stove is equipped with one valve, while a domino stove requires multiple valves.

     （3）Pre embed smoke exhaust hoses in the ceiling and drag them to the vicinity of the installation opening of the smoke exhaust fan.

     （4）The light wires are arranged in the middle position behind the cabinet where the lights are installed, and the height behind the bottom cabinet is generally high600The general height behind the hanging cabinet1900。

     （5）If the lamp itself does not come with a switch, a switch circuit control needs to be reserved. The light switch inside the cabinet can be set at the main switch at the entrance, and the light switch under the cabinet can be set at the nearest wall below the light, which can be side by side with the backup socket on the wall.

     （6） The shelf light line is reserved behind the shelf; The baseboard light line is pre embedded on the ground, away from the wall surface300。